This is Defi SPORT DISPLAY F, DF15901.
n in-vehicle digital multi-display with a variety of functions that uses a 4.2-inch TFT color LCD with touch panel, low-reflection glass, and an automatic light control sensor.
By connecting to the advanced system, sensor information such as vehicle speed, engine speed, intake pressure, oil pressure, heat pressure, oil temperature, water temperature, and exhaust temperature can be displayed.
Displays ISO CAN information such as vehicle speed, engine speed, intake pressure, water temperature, slot opening, intake temperature, and voltage from OBDII.
Equipped with display of travel trajectory and time measurement function using GNSS position information.
G/Gyro sensor displays vehicle posture information including front, rear, left and right.
It is possible to write, read and update vehicle driving data using a USB memory.
You can analyze the log data saved on the USB using a PC and special software.
Equipped with 10 LED sequential indicators that can be set according to engine RPM.
Comes with a touch panel and a separate switch that is easy to operate even with racing gloves.
DF15902, a set that includes an ADVANCE control unit and various sensors, is also available.
【SET CONTENT】
DSDF body x 1
Switch x 1
Power harness x 1
OBDII harness x 1
Adapter harness x 1
GNSS antenna x 1
Tie wrap x 4
Mounting money x 2
GNSS antenna x 1
Mounting bolt/washer/nut/spring washer x 4
Tapping screw for switch installation x 1 Mounting base x 1
Electro tap x 4
Pitack x 1
Double-sided tape x 1
Instruction manual
Warranty
【PRODUCT SPECIFICATIONS】
Power supply voltage: DC10~16V
Current consumption: 1A (when used alone), dark current 0.2mA
Applicable car models: For 12V cars only. Cannot be installed on 24V vehicles.
Cannot be installed on modified vehicles.
【WARNING】
Never modify or disassemble this product. Not only will this not be covered by the warranty, but it may also cause malfunctions or accidents.
Never perform any work immediately after the engine has stopped. Immediately after the engine is stopped, the engine and exhaust pipe are extremely hot and may cause burns.
Keep infants and children away during work. There is a risk that parts may come off and be swallowed.
Do not install it in a location where it may affect the operation of occupant protection devices (airbags, etc.). There is a risk of injury when the protective device is activated.
When using the OBD function, please do not install it on vehicles that are not compatible with the compatibility table on the website or on vehicles that are not listed on the compatibility table.
【NOTES】
If you want to acquire sensor data from the ADVANCE system, you need to install the Defi-Link ADVANCE Control Unit and various sensors. GNSS antenna and OBDII connector are included with the product. You will need to prepare a commercially available USB memory. Since the USB connector is on the back, please consider using a commercially available L-shaped USB extension harness, etc., to allow for attaching and detaching the USB memory after installing the DSDF. If you want to acquire sensor data from the ADVANCE system, you need to install the ADVANCE Control Unit and various sensors. A GNSS antenna and OBDII connector are included with the product. If you want to use recording and playback functions such as time measurement, play, and peak, you will need to prepare a commercially available USB memory. A PC is required to use LAP+ and Dashware.
Main specifications and functions: 4.2 inch TFT color LCD with touch panel, low-reflective glass, automatic dimming sensor, for high control and visibility. Display modes can be switched on a single screen (*A update is required to display G and travle trajectory mode); Comes with separate switches that are easy to operate with racing gloves.
If you want to get sensor data from the ADVANCE system, you will need to install the Defi-Link ADVANCE Control Unit and various sensors. GNSS antenna, OBDII connectors are included with the product.
Defi Sports Display F (Defi Sport Display Yef) is a multi-functional car digital multi-display.
Vehicle data can be acquired and displayed from the ADVANCE system, OBD2 connector, and GNSS (satellite positioning system including GPS) antenna. In addition, by connecting a commercially available USB memory, driving data can be recorded and played back, and analyzed using PC software.
If you want to acquire sensor data from the ADVANCE system, you need to install Defi-Link ADVANCE Control Unit/SE and various sensors.
DF15901 and DF15902 come with a GNSS antenna and OBD2 connector. DF15903 comes with a GNSS antenna, but not an OBD2 connector.
You will need to prepare a commercially available USB memory. Since the USB connector is on the back, please consider using a commercially available L-shaped USB extension harness, etc., to allow for attaching and detaching the USB memory after installing the DSDF.
The published images may differ from the actual product due to changes in shooting conditions and specifications.
Function and design specifications may change without notice. note that.
For 12V vehicles only. Cannot be installed on 24V vehicles.
Cannot be installed on modified vehicles.
For compatible car models, please check the applicable car model search on the manufacturer's website.
