Compatible models:
Alphard (AGH30W/AGH35W/GGH30W/GGH35W)
Alphard Hybrid (AYH30W)
Vellfire (AGH30W/AGH35W/GGH30W/GGH35W)
Vellfire Hybrid (AYH30W)
RAV4 (MXAA52/MXAA54)
RAV4 Hybrid (AXAH52/AXAH54)
Product Contents
The included black parts will be fixed, so you may need to cut the foot of the product
Ver.4 Independent opening light function
The conventional products have different specifications with or without opening lights.
The latest Ver.4 (Version For) has independent opening light function.
You can use or use the opening light function with or without wiring wires.
Versatile lighting ways
The opening light function is independent, so you can use it after the opening light like the previous one.
By combining the light bar lighting methods and the timer unit sold separately,
The opening light can be turned on in conjunction with the key unlock.
Turn signal with choice of flow to flash.
When the "sequential light" lights flow from the inside of the lens to the outside,
You can choose between 2 lighting methods as the original "flashing" pattern.
By connecting the wires from the left and right lenses to the included switch,
You can switch between left and right at the same time.
LED light bar function that glows when turn signal is off
Equipped with an LED light bar function that can be used by connecting to small power sources and accessories power supplies.
It turns off when the turn signal is turned off, and it will relight in about 2-3 seconds after the turn signal.
Supports you to get in and out of the dark
Uses high brightness LED with good visibility.
Illuminate your feet at night or in the dark, helping you get in and out of the house.
By connecting it to the room lamp, it can be used to unlock the light in conjunction with the unlock.
Light bar color
White or Blue
When turn signals, it will turn orange
Wiring Specifications
-Red and black wire-
Red: Turn Signals +
Black: Blink/Position Common
Blue Line
Blue: Position + (optional connection) line
Black and White Line
White: Footlamp +
Black:Footlamp-
Green and black wire
Connects to Turn Signal Switch
When used only in sequencals → Insulates both green and black.
When using only a flash: wire green and black
Brown Black Line
Brown: The opening light +
Black:Opening Light
This product can be used by connecting all functions and wires. (Not coupler on)
If there are wires that are not in use, please be sure to insulate them.
Depending on the lot, the blue line is glued to the brown and black line, but the negative blue line is common with the red line.
